Sliding fall arrester + stopper on rope with energy absorber, Delta Plus

3 multi function products in 1:
1- Sliding fall arrester on braided rope anchorage line ų 10,5 mm equipped with an extension tab with energy absorber and an AM002 carabiner.
2- Stopper on rope: The rope's adjusting device used in the safety bracket (type A) accompanies the user during his changes of position and locks under the action of a static or dynamic load.
3- Stopper on rope: The ascension device on its work support, locks under the action of a load in one direction and slides freely in the opposite direction (type B).
Plastic/Steel.
Carabiner: Steel.
Absorber: Polyester/Polyethylene.
Quick link: Stainless steel.


EN365 : 2004 Personal protective equipment against falls from a height – General requirements for the instructions for use, maintenance, periodic examination, repair, marking and packaging.

EN353-2 : 2002 Personal protection equipment against falls from a height - Part 2 : Guided type fall arresters on a flexible anchor line.

EN12841 : 2006 Personal fall protection equipment - Rope access systems - Rope adjustment devices
TYPEAType A Rope adjusting device - Adjusting device for safety bracket
TYPEBType B Rope adjusting device - climbing device for work support


SPECIFIC QUALIFYING CONFORMANCES

EN363 : 2018 Personal protection equipment against falls from a height - Personal systems for protection against falls.

EN364 : 1992 Personal protective equipment against falls from a height : Test methods.