Cordless nibblerTruTool N 200 18V (3A5) carcass CAS, Trumpf.

Cordless Alliance System (CAS) is common battery platform for cordless tools of different brands. 100% compatibility!
This tool can be used with 18 V Metabo and many other brands batteries and chargers marked with the CAS logo.

18 V carcass without battery and charger


MAXIMUM SHEET THICKNESS, STEEL 400 N/MM² : 2 mm
MAXIMUM SHEET THICKNESS, STEEL 600 N/MM²: 1.5 mm
MAXIMUM SHEET THICKNESS, STEEL 800 N/MM² : 1 mm
MAXIMUM SHEET THICKNESS, ALUMINUM UP TO 250bN/MM²: 2.5 mm
SMALLEST RADIUS 4 mm
WORKING SPEED 1.6 m/min
STROKE RATE AT NOMINAL LOAD 1380 1/min
STARTING HOLE DIAMETER 17 mm
VOLTAGE 18 V
WEIGHT (WITH 4 AH RECHARGEABLE BATTERY) 2.2 kg

For the first time, you can use the battery machine to cut flat and corrugated sheets of up to 2 mm sheet thickness cordlessly. Even interior cutouts and notches are easy to process as the machine can be rotated on the spot. There is no need for tools to change the cutting direction. You can change dies and punches quickly, without the need for any additional tools. You can upgrade and expand the TruTool N 200 Li-ion rechargeable battery 18 V with further tools as required. This means, for example, even cutting trapezoid sheets is not problem. For example, with the 4 Ah rechargeable battery, you can cut up to approx. 40 meters in mild steel and a sheet thickness of 1 mm with one battery charge.
The tool can be rotated through 360° in steps of 45°, without the need for additional tools.